0
  • Customer service in 3 languages
  • Around 250 000 orders per year
Shopping cart

Your shopping cart is empty.

No idea? Have another look at our bestsellers.

View our bestsellers

english deutsch français español italiano nederlands
The product was added to your shopping cart.
Go to shopping cart

Garbage can lid holder

Keeps the lid of garbage cans open
Author: Michael Madej, Rommerskirchen - Eckum, Germany
Online since: 16/03/2012, Number of visits: 233073
0
I built a shelter for our garbage cans, so snow can't pile up on them in the winter, which makes them hard to open.
Often, you arrive at the garbage cans with both hands full of garbage bags and it's hard to keep the cans open to throw the bags in.
So, I screwed into the lid of each can a GTN-20 pot magnet with threaded stud. On the bottom of the lid the pot magnet is held by a screw nut.
Under the beam of the shelter I attached an old metal strip as counterpart for the magnets. Now, you can just lift the lid and the magnet snaps onto the metal and keeps it open.
The magnet attaches pretty well to the metal strip, but since the garbage can comes in and out of the shelter often, a flattened steel bar might work even better. This way, the can wouldn't have to be placed exactly under the thin metal strip.
The whole thing is really practical and I am happy about it every time I take out the trash.
Note:
That's what the magnets look like after a year of outdoor use. It would be better to seal them with a shock-resistant varnish before you screw them on.
Note from the supermagnete team:
Officially, we discourage using neodymium magnets outdoors, because it damages them. See safety information for neodymium magnets. You'll have to replace the pot magnets periodically.
As an alternative you will find some ferrite pot magnets linked below, which are completely waterproof, but have a lower holding force.

Articles used

Load...
Bestseller icon GTN-20 Neodymium pot magnet Ø 20 mm with threaded stud, holds approx. 12 kg, thread M4,
GTN-20
Neodymium pot magnet Ø 20 mm with threaded stud, holds approx. 12 kg, thread M4,
Bestseller icon GTN-20 Neodymium pot magnet Ø 20 mm with threaded stud, holds approx. 12 kg, thread M4,
1 pc. 3,23 EUR ea.*
from 3 pcs. 2,82 EUR ea.*
from 10 pcs. 2,44 EUR ea.*
from 20 pcs. 2,26 EUR ea.*
from 40 pcs. 2,10 EUR ea.*
Ask for a rebate from 240 pcs.
 
Receive e-mail when item available again
MD-23 metal discs with countersunk hole Ø 23 mm, as a counterpart to magnets, these are not magnets!
MD-23
metal discs with countersunk hole Ø 23 mm, as a counterpart to magnets, these are not magnets!
MD-23 metal discs with countersunk hole Ø 23 mm, as a counterpart to magnets, these are not magnets!
10 pcs. 0,37 EUR ea.*
from 40 pcs. 0,32 EUR ea.*
from 80 pcs. 0,30 EUR ea.*
from 160 pcs. 0,28 EUR ea.*
Ask for a rebate from 2 500 pcs.
Available: 34 560 pcs.
MSD-21 metal discs with an edge and countersunk hole M3, inner diameter 21 mm, as a counterpart to magnets, these are not magnets!
MSD-21
metal discs with an edge and countersunk hole M3, inner diameter 21 mm, as a counterpart to magnets, these are not magnets!
Counteracts shear force.
MSD-21 metal discs with an edge and countersunk hole M3, inner diameter 21 mm, as a counterpart to magnets, these are not magnets!
10 pcs. 1,42 EUR ea.*
from 20 pcs. 1,34 EUR ea.*
from 40 pcs. 1,28 EUR ea.*
Ask for a rebate from 3 000 pcs.
Available: 3 180 pcs.
Bestseller icon GTNG-43 neodymium magnet system Ø 43 mm black rubber-coated with threaded stud, holds approx. 10 kg, thread M4
GTNG-43
neodymium magnet system Ø 43 mm black rubber-coated with threaded stud, holds approx. 10 kg, thread M4
Bestseller icon GTNG-43 neodymium magnet system Ø 43 mm black rubber-coated with threaded stud, holds approx. 10 kg, thread M4
1 pc. 5,32 EUR ea.*
from 3 pcs. 4,65 EUR ea.*
from 10 pcs. 4,05 EUR ea.*
from 20 pcs. 3,76 EUR ea.*
from 40 pcs. 3,50 EUR ea.*
Ask for a rebate from 160 pcs.
Available: 7 558 pcs.
CSF-40 Ferrite pot magnet Ø 40 mm with countersunk hole, holds approx. 16 kg,
CSF-40
Ferrite pot magnet Ø 40 mm with countersunk hole, holds approx. 16 kg,
CSF-40 Ferrite pot magnet Ø 40 mm with countersunk hole, holds approx. 16 kg,
5 pcs. 1,93 EUR ea.*
from 15 pcs. 1,68 EUR ea.*
from 40 pcs. 1,50 EUR ea.*
from 80 pcs. 1,39 EUR ea.*
Ask for a rebate from 400 pcs.
Available: 9 320 pcs.
CSF-25 Ferrite pot magnet Ø 25 mm with countersunk hole, holds approx. 2,2 kg,
CSF-25
Ferrite pot magnet Ø 25 mm with countersunk hole, holds approx. 2,2 kg,
CSF-25 Ferrite pot magnet Ø 25 mm with countersunk hole, holds approx. 2,2 kg,
5 pcs. 1,55 EUR ea.*
from 15 pcs. 1,35 EUR ea.*
from 40 pcs. 1,19 EUR ea.*
from 80 pcs. 1,10 EUR ea.*
Ask for a rebate from 350 pcs.
Available: 5 265 pcs.
ITF-25 ferrite pot magnet Ø 25 mm with internal thread, holds approx. 3,6 kg, thread M4
ITF-25
ferrite pot magnet Ø 25 mm with internal thread, holds approx. 3,6 kg, thread M4
ITF-25 ferrite pot magnet Ø 25 mm with internal thread, holds approx. 3,6 kg, thread M4
1 pc. 3,33 EUR ea.*
from 3 pcs. 2,94 EUR ea.*
from 10 pcs. 2,59 EUR ea.*
from 20 pcs. 2,42 EUR ea.*
from 40 pcs. 2,27 EUR ea.*
Ask for a rebate from 400 pcs.
Available: 5 483 pcs.
ITF-32 ferrite pot magnet Ø 32 mm with internal thread, holds approx. 7,6 kg, thread M4
ITF-32
ferrite pot magnet Ø 32 mm with internal thread, holds approx. 7,6 kg, thread M4
ITF-32 ferrite pot magnet Ø 32 mm with internal thread, holds approx. 7,6 kg, thread M4
1 pc. 3,39 EUR ea.*
from 3 pcs. 3,00 EUR ea.*
from 10 pcs. 2,66 EUR ea.*
from 20 pcs. 2,49 EUR ea.*
from 40 pcs. 2,34 EUR ea.*
Ask for a rebate from 450 pcs.
Available: 780 pcs.
0 people like this customer project
-Projects are bookmarked in your customer account

This might also interest you

Protecting fish bait Protecting fish bait
Man Overboard! Man Overboard!
Cutting aid for power saws Cutting aid for power saws
Magnetic broom Magnetic broom

keywords

The entire content of this site is protected by copyright.
Copying the content or using it elsewhere is not permitted without explicit approval.