Attaching brush to hoover

Have the brush handy during hoovering

Author: Martin G., München, Germany

Online since: 12/09/2011, Number of visits: 109468

Idea: Attach a brush to the hoover pole

A brush is a handy companion for the hoover when it comes to cleaning dusty areas. The brush gently removes the dust and the hoover sucks it up.

This method works well at home but also for cleaning tools. Unfortunately, my hoover doesn't have a place to attach a brush.

Solution: Attach it to the hoover pole

I found an area where I can attach a brush with magnets - the steel pole. In order to keep the brush in place during hoovering, I secured it with two strong magnets, which works great.

Material needed

2 Countersunk pot magnets
2 countersunk screws
2 nuts
2 washers
Adhesive UHU MAX REPAIR

In addition, if the pole is not magnetic:

2 metal discs to screw or glue on as a counterpart (link below)

Construction manual "Magnetise a brush"

The top magnet was fastened with a countersunk screw, a nut, and a washer to the preexisting hole of the brush.

On the bottom side, I drilled a hole into the plastic and applied some adhesive, which secures the screw on the brush. If you drill the hole in the right size (slightly smaller than the thread of the screw) you can do without the superglue.

Articles used

CSN-13

neodymium pot magnet Ø 13 mm with countersunk hole, holds approx. 3 kg,

	5 pcs.	1,53 EUR ea.*
from	15 pcs.	1,32 EUR ea.*
from	40 pcs.	1,16 EUR ea.*
from	80 pcs.	1,07 EUR ea.*
Ask for a rebate from 350 pcs.

Available: 238 470 pcs.

MD-15

metal discs with countersunk hole Ø 15 mm, as a counterpart to magnets, these are not magnets!

	10 pcs.	0,28 EUR ea.*
from	40 pcs.	0,23 EUR ea.*
from	80 pcs.	0,21 EUR ea.*
from	160 pcs.	0,20 EUR ea.*
Ask for a rebate from 1 800 pcs.

Available: 290 pcs.

UHU MAX REPAIR

magnet glue, waterproof, without solvents, shelf life of 24 months, 20 g tube
To glue on super magnets

1 pc. 7,95 EUR ea.* (397,50EUR/kg)

Available: 1 829 pcs.

PAS-13

metal discs self-adhesive Ø 13 mm, as a counterpart to magnets, these are not magnets!

	10 pcs.	0,30 EUR ea.*
from	40 pcs.	0,25 EUR ea.*
from	80 pcs.	0,23 EUR ea.*
from	160 pcs.	0,21 EUR ea.*
Ask for a rebate from 1 900 pcs.

Available: 1 710 pcs.

PAS-13-W

metal discs self-adhesive white Ø 13 mm, as a counterpart to magnets, these are not magnets!

	10 pcs.	0,34 EUR ea.*
from	40 pcs.	0,29 EUR ea.*
from	80 pcs.	0,27 EUR ea.*
from	160 pcs.	0,25 EUR ea.*
Ask for a rebate from 2 500 pcs.

Receive e-mail when item available again

ZTN-16

neodymium pot magnet Ø 16 mm with counterbore hole, holds approx. 4 kg,

	5 pcs.	1,77 EUR ea.*
from	15 pcs.	1,53 EUR ea.*
from	40 pcs.	1,36 EUR ea.*
from	80 pcs.	1,25 EUR ea.*
Ask for a rebate from 300 pcs.

Available: 8 410 pcs.

0 people like this customer project -Projects are bookmarked in your customer account

This might also interest you

Attaching headphone

Securing a carpet

Carrying case for fantasy miniatures

Bicycle map holder

keywords

Attaching ( 136 )
Cleaning ( 9 )
Sitting-room ( 90 )
Bedroom ( 36 )
Easy ( 200 )
Useful ( 234 )

The entire content of this site is protected by copyright.
Copying the content or using it elsewhere is not permitted without explicit approval.